Rental @S$300/ Month
Range: 4 - 20 hPa
CPAP, Bilevel S, T, ST
The Hoffrichter TREND II BILEVEL ST20 generates two pressure levels in the S-, ST- or T-mode via an electrically controlled blower. Switching from one pressure level to another is realized via a quick change of the revolutions of the fitted high-performance blower to keep the stress for the patient as low as possible.
Spontaneous trigger - the change from one pressure level to another is triggered by starting respiration of the patient only.
Spontaneous breathing and Time - as long as the patient is breathing independently the device is operating in the S-mode. Once the patient stops breathing the device automatically switches into the T-mode and provides respiration for the patient in the prescribed safety frequency. The delay time after which the device switches into the T-mode can be set.
Time respiration with prescribed, set inspiration time. If the trigger function is deactivated the patient is ventilated according to the set parameters. If the trigger function is activated the device accepts only spontaneous trigger signals in the expiration phase.
The respiration trigger detects the patients efforts to breath in and out and signals these efforts to the control device. A flow-based trigger is integrated which can be set separately for inspiration and expiration. While the pressure increases during inspiration it decreases during expiration. In connection with an optimum slope adjustment ths results in a ventilation which is very comfortable for the patient and which gives the patient the impression as if the device is following the natural respiration without delay.
To generate the necessary pressure, the device is provided with an electronically controlled blower. In order to keep the stress for the patient as low as possible, the blower has been designed with a high reserve capacity and a quick control response. The pressure is measured directly in the mask and constantly controlled by the device. Consequently, the breathing work for the patient is as easy as possible. There are two separate tubings in the device.
|Dimensions||215 mm x 195 mm x 105 mm|
|Power Supply||100 V - 240 V AC, 50 - 60 Hz|
|Internal Battery||Optional with AKKUPACK uni|
|Pressure Range||4 - 20 hPa (mbar)|
|Noise Level||< 26 dB(A) at 10 hPa|
|Respiratory Modes||CPAP, Bilevel S, Bilevel T, Bilevel ST|
|Functions||start/stop automatic, softstart ramp, leakage test, leakage alarm, power failure alarm, automatic turbine start after power failure, date, time and wake up function.|